6
Under Desk/Wallmount Rack
Drywall Installation
Important!
You will need to use longer screws than the
included M5×25 screws to mount the rack to drywall.
Be sure to locate the wall studs. If wall studs are
not available, use suitable wall anchors.
The rack has two round holes that are spaced
16 inches apart for horizontal mounting
into 16-on-center drywall studs.
Installing Rack-Mount Equipment
Locate the appropriate mounting holes in the rack.
Note:
1U = 3 rack holes.
Install the cage nuts from the back of the rack,
so the cage nut lips are pointing out.
1. Slide one lip into the hole and
press against it until you can
fit the other lip into the hole.
16 in.
