- 18 -
To change the relative air pressure, press and hold the
Relative/Absolute
-button
30
for 3 seconds. The air pressure
value will blink on the display and can be set by pressing the
°C/°F +
-button
28
or
MAX/MIN
-button
29.
Confirm your
setting by pressing the
Relative/Absolute
-button
30
.
Select the air pressure unit Hectopascal (hPa) or Inches of mercury (inHg) by pressing and holding the
°C/°F + -button
28
for 3 seconds.
12-hour air pressure history
Press the
HISTORY/WEATHER
-button
27
to view the air pressure history for the last 12 hours.
0 – HR = current air pressure
- 1 HR = air pressure 1 hour ago
-2 HR = air pressure 2 hours ago... and so on
Outdoor sensor/channel setting
You can use the weather station with up to 3 outdoor sensors at the same time. Open the battery compartment of the
outdoor sensor and select a channel (1-3) by using the channel switch
39
. Press and hold the
CHANNEL
-button
26
for 3
seconds or until an audible signal sounds. The weather station will now attempt to receive the signal
43
. Close the battery
compartment. Press the
°C/°F
-button
41
to select
°C
-Celsius or
°F
-Fahrenheit.
Note: The outdoor sensor must be within a maximum distance of 100 m of the weather station with no obstructions.
If you are using mutliple outdoor sensors: Press the
CHANNEL
-button
26
to select the reception channel.
The rotation symbol on the display at
22
indicates that the weather station is rotating through channels 1-3.
Only active outdoor sensors are displayed. Press and hold the
CHANNEL
-button
26
to remove unused channels. When
adding an additional outdoor sensor, the weather station will detect it automatically.
Outdoor temperature tendency
The temperature trend
21
is displayed upon successful reception from the outdoor sensor.
Outdoor temperature rising
Outdoor temperature constant
Outdoor temperature falling
Indoor humidity
The current indoor humidity is shown on the display at
5
. The comfort icon
4
can show 3 levels of comfort:
< 40 %
DRY
40 – 60 %
COMFORT
> 60 %
HUMID
< 20 °C
/
20 – 26°C
> 26 °C
/
Maximum and minimum values
The maximum and minimum temperature and humidity are stored as soon as the batteries are inserted.
Briefly press the
Max/Min-
-button
29
to display the maximum MAX, minimum MIN and current indoor temperature
3
,
outdoor temperature
24
and humidity
5
on the display. To delete the maximum and minimum values, press and hold the
Max/Min-
-button
29
for 3 seconds. An audible signal will sound and the stored values will be deleted. The weather
station will immediately restart recording of the values.
Battery level indicator
If the batteries run too low to power the weather station, the outdoor sensor and signal transmission, the battery level
indicator
23
will appear on the display. Replace the batteries in all devices as soon as possible. Restart the weather
station.
Restart (RESET)
Press the
RESET
-button
33
to reset the weather station.
Cleaning instructions
Clean the product with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.
