Back Panel
1. AC input
2. Output receptacles
3. USB & RJ45 communication
1
1
2
3
1. Inspection
Remove the UPS from its packaging and inspect it for damage that may
have occurred during shipping. If any damage is discovered, repack the
unit and return it to the place of purchase.
2. Charging
This unit is shipped from the factory with its internal battery fully charged,
however, some charge may be lost during shipping and the battery
should be recharged prior to use. Turn on the UPS, Plug the unit into an
appropriate power supply and allow the UPS to charge fully by leaving it
plugged in for at least 6 hours with no load (no electrical devices such as
computers, monitors, etc.) connected.