background image

Page 4

Unpacking and Setting Up Your Globe

Keep your box and everything in it! 

The box that your plasma 

globe came in is specially made for protecting your plasma globe. 
Although unlikely, from time to time plasma globes can fail, and 
if that should happen, you will need your box so that we can 
safely ship your plasma globe back to us for warranty repair or 
replacement.

To set up your plasma globe, find a suitable location away from 
direct sunlight, and preferably somewhere where you are able 
to dim the lights. Remember to keep the globe away from any 
metal objects or surfaces, as these may be a shock hazard when 
the plasma globe is powered on. (The plasma globe has a low-
amperage current, so the shock is not dangerous. It’s more like a 
shock of static electricity—safe, but unpleasant.) Once you have 
your plasma globe in place, operating it is as simple as plugging it in 
and turning it on.

To extend the life of the electronics and the gases in the plasma 
globe, only leave the display turned on when there are people 
around to appreciate it. In addition, do not leave the plasma globe 
at full power for an extended period. All electronics slowly wear out 
over time, so turning the globe off when you are not around will 
ensure that you get the most out of the life of your globe.

Plugging in the power adapter

Power adjustment dial

Summary of Contents for Plasma Globe

















Reviews: