background image

Page 5

Playing With Your Plasma Globe

Your plasma globe is bright enough to be visible in a lighted room, 
but you will not get a very good effect in bright light. To get the best 
experience from your plasma globe, we recommend that you place 
it away from direct light, preferably in a darkened room. Once you’ve 
found the right place for your globe, just relax, dim the lights, and 
enjoy the show that your plasma globe has to offer.

Plasma globes love to be touched, so don’t hesitate in doing so. 
In fact, some of the most interesting effects can only be achieved 
through contact or close proximity with the globe. Go ahead and 
experiment! Try using your whole palm, or just your fingertips, or 
even just a single fingertip. See what happens when you lightly 
hover your hand above the surface of the glass. Put your hands 
on different parts of the globe and see how the plasma reacts 
when your hands are in different positions. Try the plasma globe 
at different power levels; some effects can only be seen when the 
plasma globe is at low power. There are a lot of different things you 
can try with your plasma globe, but the numerous possibilities are 
sure to keep you captivated for quite some time.

Summary of Contents for Plasma Globe

















Reviews: