background image

Page 7

(or “ionized”) and the electrons begin to break off from the atoms 
and move around freely. Unlike a typical gas, plasma is electrically 
conductive and responds strongly to the effects of electromagnetic 
fields. Applying an electromagnetic field to plasma can cause it to 
form into structures such as filaments, beams, and double layers. 
These structures are what give shape to the moving tendrils of light 
that you see in the plasma globe.

When a plasma globe is turned on, the gas inside the globe is 
charged with a high-voltage current from the power supply. The high 
voltage of the current causes the gas to ionize and turn into plasma. 
This turns the entire plasma globe into a conductor, allowing the 
electricity from the electrode to travel through the plasma and 
escape through the air.

At the same time, the power sup-
ply emits a high-frequency current, 
alternating at thousands of times 
per second, and this high-frequen-
cy current creates an oscillating 
electromagnetic field. This electro-
magnetic field interacts with the 
plasma and causes the electrons 
and ions to move around, exciting 
the surrounding atoms. When the atoms  
become excited, they quickly release their energy, and this energy is 
emitted in the form of light. As the electricity from the center of the 
globe attempts to escape, it creates ion trails, and these trails act 
as a path for the other electrons. When a large quantity of electrons 
move along the same path, a plasma tendril is formed, and the 
atoms emit enough light that the tendril becomes visible. The color 
of the light you see depends on what gases are present inside the 
globe.

The Northern Lights are an example of ionized plasma 

from the sun interacting with the earth’s magnetic field.

Summary of Contents for Plasma Globe

















Reviews:

Related manuals for Plasma Globe