17
USERS GUIDE
www.auroramm.com
Obtaining Optimal Scan Range
TAVIS Thermal AudioVisual Integrated Solution can be affixed to a number of mounts, including desktop mounts, wall
mounts and pole stand mounts. A mount is highly recommended, as it encourages hands-free access and allows you to
set up TAVIS to a desired height and angle. Any size TAVIS may be affixed to Aurora Multimedia’s recommended pole
mounts or wall mounts.
The type of mount you choose should be considered with the height of the people who will most often use TAVIS in mind.
For example, a desktop mount is best suited for an environment where a counter is present near the operator. For
elementary school, where the target height of individuals would be much shorter than the height of your average adult an
adjustable pole stand can be more useful. In a wide-open area, such as a shopping mall, a pole mount may be best, as
the wall may be too far from the door and there may be no desk for the tablet to rest on. The wall mount would be best
suited for areas like waiting rooms, where the placement would not be obtrusive, but also facilitate use while an individual
is being checked in or waiting to enter the next room.
Placing the Pole Mount
The APS-1 or APS-2 pole mount by Aurora Multimedia allows TAVIS to be set in place nearly anywhere. By default, we
recommend that you place TAVIS within the 60” to 65” range. Depending on your placement within that range, TAVIS will
be capable of scanning people who are 4.5 feet (54”) to 6.5 feet (78”) tall. This gives TAVIS a consistent vertical optical
range of 26” when within the recommended 0.5 meters (1.6 ft) to 1.5 meter (5 ft) distance from the base of the pole stand.
This allows for an 18” range of coverage when comfortably allowing room for an entire person’s head. By using the lever
to adjust the angle of TAVIS, the pole stand is able to increase the vertical optical range. The further distance allows for 2
people scanning while a closer range of about 12” to 18” allows for single person canthus (tear duct) sensing.
Any wires connecting to TAVIS should run through the inside of the pole stand and out under the pole stand’s base.
Please ensure that the pole stand is not situated where it may be an obstacle for people passing by. The pole stand
should rest on a flat surface, with its wires secured.
Placing the Desktop Mount
Desktop mounts have the added benefit of being able to adjust the angle of TAVIS. By adjusting the angle, the vertical
optical range increases from 26” to over 32”, allowing for a larger range of heights to interact with TAVIS without further
adjustment. The additional optical range, combined with the lower base height of the unit (desktop level), allows the
desktop mount to accommodate people of all heights.
Summary of Contents for TAVIS TAV-10
