4
User Guide
Rear Panel
Rear Connections
DC IN -
Connect the supplied 12V / 2A power adapter's output.
RF IN -
Connect a VHF/UHF/ATSC coaxial RF antenna cable to this port for signal input.
RS-232 -
Connection for remote control via external system (e.g. PC).(see Appendix 3)
IR IN -
Connection for external IR extender.
S/PDIF OUT -
Digital audio outputs (optical and RCA type) for connection to external digital audio system.
YPbPr -
Analog hi-res component video for connection to legacy audio/video switchers or displays.
VIDEO -
Analog composite video output for connection to legacy audio/video switchers or displays.
AUDIO L/R
–
Analog stereo line level right and left outputs.
HDMI 2.0 OUT -
HDMI output comprised of digital video and audio signals, for connection to compatible
displays or switching/routing devices.
USB -
Alternate method for installing firmware updates and cloning.
LAN -
RJ-45 Ethernet port (10/100/1000Mbps) for used for control, IPTV input and firmware updates. (see
Appendix 3) Caution: DO NOT plug a telephone line into the network connector!