C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
21
Optional equipment
Optional equipment is marked with an asterisk
(
)
. Optional equipment is only supplied
at the express wish of the customer, for certain versions of forklift or even only in certain
countries.
- 4 WD transmission engaged by demand (FULL GRIP
®
)
- Partially closed cab (front and rear windshield).
- Closed cab with heating (standard for USA market).
- Hydraulic shovels: 14 cu.ft (400 l.) and 21 cu.ft (600 l.)
- 8ft 6in (2600 mm), 11ft 10in (3600 mm) and 14ft 9in (4500 mm) maximum height
Duplex Mast
-
12ft2in
(3700 mm),
14ft 1in
(4300 mm) and
17ft 8in
(5400 mm) maximum
height Triplex mast (free lift)
- 5ft 10in (1782 mm) and 5ft 11in (1810 mm) wide front axle (not available for the
C200H Compact model).
- 4ft 9in (1450 mm) 4ft 11in (1510 mm) narrow axle
- 63 in. (1600 mm) and 47 in. (1200 mm) width load backrest (standard for USA
market).
- Electronic equipment anti-theft.
- Oxi-catalytic exhaust purifier.
- Exhaust Spark arrestor
- Filter of gas-oil with water separator
- Side-shift fork carriage 63 in. (1600 mm ) width
- Super-elastic solid tyres.
- Extra wide tyres.
- Industrial use tyres
- Lighting equipment (standard for USA market).
- 4th hydraulic control for attachments
Where the forklift comes equipped with accessories mounted at factory, please read the
relevant Instruction Manual for each accessory carefully before use. Each accessory
has its own Instruction Manual issued by the manufacturer, and this is provided with the
forklift Operator’s and Safety Manual.
Where accessories and equipment are fitted to the basic chassis or fork carriage plate at
a later date by companies other than the manufacturer, the specifications and limitations
of the forklift with respect to weight and dimensions, the adjustment and effectiveness
of the lighting system, the protective system requirements, or any additional systems
required to guarantee vehicle safety should be taken into consideration.
Technical
Specifications
