C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
57
WARNING
Before each period of operation, check the forklift for correct operation of the
steering, brakes, hydraulic controls, instruments and safety equipment. Check
the neutral position of the FNR switch. A machine that runs correctly is more
efficient and can prevent accidents. Make all necessary adjustments or repairs
before you operate the machine.
Entering and leaving the operator cabin (fig. 1)
Don’t hold and pull of the steering wheel to come in/out the forklift, use the handles
located on the overhead guard and always place your foot on the rough bands of the
step, to prevent any downfall when you come in or come out.
Adjusting the seat and the steering wheel (figs. 2, 3, 4, 5)
Before using the forklift adjust the seat and the steering wheel to a comfortable driving
position.
On all machines the operator is able to adjust the seat in the fore-aft direction by lifting
knob
(a)
and sliding seat to the desired position, then releasing the knob to lock the
seat into position.
The seat suspension may be adjusted from 132 to 264 lb. (60 to120 Kg) for driver’s
weight by turning knob
(b)
. Turning clockwise the weight decreases and turning counter-
clockwise it increases. Seats normally leave the factory adjusted for a driver weighting
198 lb. (90 Kg).
It is also possible to adjust the seat backrest angle. The seat backrest tilts forward or
backwards by turning knob
(c)
.
WARNING
Securely fasten the seat belt.
(fig. 3)
(fig. 4)
(fig. 5)
(fig. 2)
Operating
the forklift
(fig. 1)
b
b
c
a
a
c
