EN
14
Enable or disable the sound of the buttons located on the unit
Values: On/Off
Beep Sound
Display the current firmware version.
Version
Set the current date and time. Use and buttons to switch
Y/M/D/H/M and click button to confirm/save the settings.
Date/Time
Adding the current date, time of the event to the video being recorded
and they will be displayed at the right bottom corner of videos.
Values: Off/On
Date Stamp
Set PAL mode or NTSC mode.
PAL → Frame rate of 25 frames per second (fps) at an aspect ratio of
720x576.
NTSC → Frame rate of 30 frames per second (fps) at an aspect ratio
of 720x480.
Values: PAL / NTSC
TV Mode
Format the memory card.
Values: OK/Cancel
Note:
Backup desired data before formatting. You can back up the data to
the PC (Win XP2/Vista/Win 7/Win 8) via included USB cable.
Format
Reset all settings to factory default values.
Values: OK/Cancel
Default Setting
