background image

www.marketdirect.com.au   

    

Ph: 1300 494 494

40

Plumbing and Toilet

Truma Hot Water Heater

Your Truma hot water system should be de-scaled every 6 to 12 months depending on use. See the trauma manual 
for details or view the video on the link below.

 

Grey Water Tank

To keep the grey water tank fresh and remove smells it should be emptied and flushed regularly. Tank fresheners are 
available in various brands and are highly recommended.

 

 

Fresh Water Tanks

When used for drinking water regular tank maintenance is vital. By regularly using a product such as Camec Tank 
Clean you will reduce or eliminate bacteria and after taste. Always fill your tanks using a potable water grade hose. 
Fitting a filter that removes smell, taste and bacteria is highly recommended.

 

Toilet Care and Maintenance
Chemicals

 

Always use water treatment and conditioning products recommended by the manufacturer.

 

 

Thetford

 
Waste Holding Tank: 

The recommended product for the waste holding tank on Thetford toilet systems is 

 

Aqua Kem Blue

 or 

Aqua Kem Green

 for better environmental performance.

 

 
Cleaning Cassette Tank: “Cassette Tank Cleaner”

 is the recommended product for this application.

 

 
Flush Water Tank: 

Only suitable for AusRV models that have a toilet flush tank. 

 

***Do not add to main water tanks! *** 

Thetford recommend 

“Aqua Rinse” 

 
Grey Water Tank: Tank Freshener

Summary of Contents for XL13






















































































Reviews: