background image

Cod. PLDC88056 

RELIABLE PRODUCTS . . . RELIABLE PEOPLE

AUSTRALIAN PUMP

Australian Pump Industries Pty Ltd ACN 061 619 234   ABN 79 061 619 234

7 Gladstone Rd, Castle Hill NSW 2154    PO Box 6164, BHBC NSW 2153

Ph 02 8865 3500   Fx 02 9894 4240   www.aussiepumps.com.au

Look after your machine . . . 
and it will look after you!

AND REMEMBER . . .

Always wear protective clothing, 

including boots and goggles!

IMPORTANT INFORMATION

ROUTINE CHECK LIST - IMPORTANT
- DAILY:

1.

Check pump oil level.  If oil is milky contact your Aussie Eco-Clean Distributor for service.

2.

Check all high pressure components for leaks:
a) gun/lance;

b) high pressure hose;

c) all 

fi

ttings.

3.

Check power supply cable and plug for damage.

4.

Check water inlet 

fi

lter - clean if necessary.

- MONTHLY:

1.

Check high pressure nozzle for wear.  If pressure has dropped off, replace nozzle.  If you machine is
used regularly the nozzle may need replacing monthly to maintain performance.

2.

Clean detergent suction 

fi

lter.

3.

Change lance nozzle tip.

4.

Change oil

5.

Check fuel 

fi

lter

- 6 MONTHLY/250 HOURS:

 - Contact your Aussie Eco-Clean Distributor for recommended service.

- ANNUALLY/ 500 HOURS:

 - Contact your Aussie Eco-Clean Distributor for recommended service.

WARNING

HIGH PRESSURE SETTING

 - The high pressure pump is factory set and 

sealed to operate at its rated pressure.

  DO NOT ADJUST. 

 

Tampering with the pressure regulator will void warranty and can be 

DANGEROUS

Summary of Contents for D1310P4





















Reviews: