- 5 -
1. Attach the installation sticker to the ceiling/wall. Please check the
arrow direction. The arrow should be kept the same direction with
the Top arrow on the camera case when installing on the wall.
2. Drilling 3 pilot mounting holes and a cable hole according the
circles on the sticker. The diameter of mounting hole is 7mm. Then
hammer the 3 plastic anchors into the mounting holes. The cable
hole should bigger enough to feed the cable though the hole.
3. Feed the external Ethernet and power cable though the cable
hole, and connect the cables to the camera connector. Please
make sure the connecting is firm.
4. Check the arrow direction of the camera, keep it as same as the
arrow of attached sticker. Secure the screws and please make sure
the camera is securely installed.
Ceiling and wall mount
The recommend wall installation height is about 2.5 to 3 meters.
Notice: Please confirm the installation FOV before mount the
camera on the wall, and keep the Top arrow on the camera is
towards the ceiling.
5. Angle modify
