- 8 -
IP Setting
The default IP address of each network panoramic camera is
192.168.0.123. According the network system different, the camera
IP address maybe need to be changed to the same range of the
network system, or the operating will fail.
It is recommended to change the control computer’s IP address to
192.168.0.xxx at first, and connect the camera into the same
network system with the computer. Then open the panoramic
camera software or open the IE explorer to modify the camera IP
address.
Open the explorer and input the address 192.168.0.123, download
and install the Web plug in component.
When the first time use the IE explorer to login on the camera,
maybe it need to setting the ActiveX . Please set all the ActiveX
relative items to Enable or Prompt.
Steps: IE Explorer
Internet Options
Security
Custom level.
Input the user name and the password after get into the login
window.
The default user name is “
admin
”, and the password is
“
123456
”.
C
lick the “Config” to remote setting window, click the Network
setting to change the IP address. Please save the new IP address
after changed. Then please waiting the camera auto restart to
active the new IP address.
