10
Step 8) Assemble Side Burner Electrode and Side Burner:
· Feed Electrode wire through upper left hole from large center hole in Side Burner Reflector.
(FIG. 8A) Allow electrode into to follow wire into hole and lie flat. (8B)
FIG. 8A
(32) Side Burner
Electrode 1 pc
(33) Side Burner
1 pc
(23) Wingnut, M4
1 pc
FIG. 8B
· Insert Side Burner tube through large hole in Side Burner Pan. Allow threaded stud to go
through hole in Electrode bracket while laying the Burner flat. (FIG. 8C) Be sure to fit the Side
Burner tube over the Side Burner valve nozzle. (FIG. 8D) Secure Side Burner with M4 Wingnut.
FIG. 8C
FIG. 8D
(35) Side Burner Grid
1 pc
Side Burner tube
end fitted over
valve nozzle
(23) Wingnut, M4
Electrode Wire
through hole
Threaded
Stud
· Attach Electrode Wire end to side terminal of piezo starter under the Control Panel. Be careful
not to bend or break terminal. (FIG. 8E)
FIG. 8E
Piezo Starter
Electrode Wire
end to Starter
Side Burner
Electrode
