Aussie Monsoon Single Phase Blasters … Operation & Maintenance Manual
5
Aussie Pumps
March 2018
* NB: Performance using 15 amp plug option
1.
NEVER
direct the spray jet at any person or animal.
Keep hands and feet clear of the cleaning nozzle at
all times.
2.
NEVER
direct spray jet at any surface that may
contain asbestos material.
3.
NEVER
hold a finger over the high pressure nozzle.
4.
NEVER
direct the spray jet at the machine itself or
any electrical equipment.
5. After use release the pressure in the high pressure
hose by operating the gun trigger.
6.
DO NOT
attempt any mechanical repair. If you have
a problem with your machine contact your local
Aussie Eco Clean Service Division, phone (02)
8865 3500.
7.
NEVER
supply any liquid other than water to the
pump inlet.
8.
DO NOT
run dry
9.
NEVER
pull the high pressure hose if it has formed
kinks or nooses.
10.
NEVER
pull the hose over sharp objects.
11.
DO NOT
join high pressure hoses. The connectors
may leak and cause the unloader to wear
prematurely. Buy extra length hoses if extended
range required.
12.
DO NOT
attempt to disconnect any hose or
coupling with pressure still in the hose.
13.
DO NOT
operate the machine whilst standing on
ladders, use a platform tower or scaffolding.
14. Operate in well ventilated areas only.
15.
DO NOT
operate if power cable is damaged,
contact a certified electrician for replacement.
16.
DO NOT
try to repair a leak in the hose or
connection while the system is under pressure.
17.
DO NOT
substitute any component part on this
machine. Use of incorrect parts could cause serious
personal injury.
18. Children should
NOT
be allowed to use the
machine.
19. We recommend the use of safety goggles and steel
cap boots when using the machine.
SAFETY PRECAUTIONS - IMPORTANT
SPECIFICATIONS
Model
Pump Pressure (psi)
Pump model
EWP
Flow rate (lpm)
Motor
Pump rpm
Weight (kg)
Monsoon 100
1600 (110 BAR)
WBL1114
2800
11
3HP 2.2kW, IP56
1450
45
Monsoon 140
2000 (140 BAR)
WBL917
3400
9
3HP 2.2kW, IP56
1450
45
