background image

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6.  Clean only with dry cloth.

7.  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. 

A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or pinched particularly  

at plugs, convenience receptacles, and the point where they exit from  
the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.

12.  Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to avoid injury from tip-over.

13.  Unplug this apparatus during lightning storms or when  

unused for long periods of time.

14.  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.

15.  This appliance shall not be exposed to dripping or splashing water and 

that no object filled with liquid such as vases shall be placed on the 
apparatus.

16.  Connect the equipment to an appropriate wall outlet that is readily 

accessible.

17.  The mains plug is used as the disconnect device and shall remain  

readily accessible. If the mains plug is not readily accessible due to 
mounting in a 19” rack, then the mains plug for the entire rack must  
be readily accessible.

18.  WARNING: To reduce the risk of fire or electric shock, do not expose this 

apparatus to rain or moisture.

19.  An appliance with a protective earth terminal should be connected to a 

mains outlet with a protective earth connection.

1.  LISEZ ces instructions.

2.  Tenez ces instructions.

3.  Notez tous les avertissements.

4.  Suivez toutes les avertissements.

5.  N’utilisez pas ce produit près de l’eau (la piscine, la plage, le lac, etc.).

6.  Nettoyez seulement avec une étoffe sèche.

7.  Ne bloquez aucuns troux de ventilation. Installez en accord avec  

les instructions du manufacturier.

8.  N’installez près aucunes sources de chaleur comme radiateurs, registres 

de chaleur, fours ou les autres équipements (y compris amplificateurs)  
qui produisent la chaleur.

9.  Ne défaites pas le but de sécurité de la fiche polarisée ou base-type.  

Une fiche polarisée a deux tranchants avec un plus large que l’autre.  
Une fiche de base type a deux a deux tranchants et une troisième  
pointe de base, le tranchant large ou la troisième pointe est fourni  
pour votre sécurité. Si la fiche donnée ne conforme pas votre prise  
de contact, consultez un électricien pour remplacement de la prise  
de contact obsolète.

10.  Protegez le cordon de secteur contre être marchée dessus ou pincez  

en particulier aux fiches, aux douilles de convenance, et au point où ils 
sortent de l’appareil.

11.  Seulement utilisez attachements/accessoires spécifiés par le 

manufacturier.

12.  Utilisez seulement avec un chariot, un stand, un trépied, un support  

ou une table indiquée par le manufacturier, ou vendue avec l’appareil. 
Quand un chariot est utilisé, faites attention en déplaçant la combinaison 
d’appareil/chariot pour éviter de se déséquilibrer.

13.  Arrachez la fiche du dispositif durant éclair et orage ou 

quand pas utilisé pour longues périodes de temps.

14.  Référez au personnel qualifié de service pour toutes 

réparations. La réparation est donnée quand le système 
a été endommagé à n’importe façon, par exemple un fil ou une fiche 
endommagé(e) de la source d’alimentation. Avoir été exposé à pluie ou 
humidité, n’opère pas normalement, ou avoir été tombé.

15.  L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures 

et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé 
sur l’objet.

16.  Branchez l’appareil à une source appropriée et faire que la prise à 

débrancher soit facilement accessible.

17.  La prise du secteur ne doit pas être obstruée ou doit être facilement 

accessible pendant son utilisation. Pour être complètement déconnecté  
de l’alimentation d’entrée, la prise doit être débranchée du secteur.

18.  AVERTISSEMENT: Pour éviter le risque d’incendie ou de chocs électriques, 

ne pas exposer cet appareil à la pluie ou à l’humidité.

19.  Un appareil avec la borne de terre de protection doit être connecté au 

secteur avec la connexiion de terre de protection.

IMPORTANT SAFETY INFORMATION

PRÉCAUTIONS DURANT UTILISATION

PAGE 2

AMD4200P INSTALLATION AND OPERATION MANUAL

Summary of Contents for AMD Series













Reviews: