background image

I N T R O D U C T I O N   A N D   C O N T E N T S

M X 8 1   I N S TA L L AT I O N   &   O P E R AT I O N   M A N UA L

PAG E   3

The MX81 is an 8 channel audio mixer that operates from 110/230-240

VAC @ 50/60 Hz or 24 VDC via an external 24VDC supply. 

The MX81 offers high quality audio performance & a wide array of

features in a standard 1 RU size. For table mounting, rubber feet are

supplied but these can be removed if rack mounting is intended. 

There are eight dual purpose inputs consisting of balanced XLR inputs

switchable between mic & line level and dual RCA aux/line level 

inputs. Each input has front panel trim control, status LED and bass 

& treble controls. 

Priority muting is available as an optional addition as is remote 

VCA master control and tone generation. 

The MX81 also features 4 segment LED output metering & the ability 

to internally switch input 1 to be either pre or post master. 

With both Headphone out & Record out also available the MX81 

is extremely versatile & represents excellent value for money. 

Thankyou for purchasing the Australian Monitor Installation 

Series MX81.

I N T R O D U C T I O N

3

F R O N T   PA N E L

4

R E A R   PA N E L

5

I N T E R N A L   A D J U S T M E N T S

6

I N S TA L L AT I O N   &   T R O U B L E S H O OT I N G

7

B A S I C   S E T U P   &   O P E R AT I O N

8

D I M E N S I O N S

9

B L O C K   D I AG R A M

1 0

S P E C I F I C AT I O N S

1 1

This symbol is intended to alert the user to the presence 

of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence 

of important operation and maintenance (servicing)

instructions in the literature accompanying the appliance.

To prevent electric shock do not use this (polarised) plug

with an extension cord, receptacle or other outlet unless

the blades can be fully inserted to prevent blade exposure.

To prevent electric shock, match wide blade of plug to

wide slot, fully insert.

Caution:

AUS, EUR, USA

Copyright 24th Jan 2006

Rev A 24/01/06

Summary of Contents for MX81













Reviews: