© Austria Email AG
id.: 17-14-35-1251-08 | 02.2016
If the HP uses air from the environment in the room, the space must be at least 30 m
5.5
Installation
5.5.1 Hydraulic connections
The water pipe must be connected in accordance with the
connection of water heaters. How to connect the water pipe is shown in Figure 3. The maximum pressure in
the water pipe must not be more than 6 bar. The smooth pipe heat exchanger must be professionally flushed
through before carrying out the initial installation (in addition we recommend the installation of a dirt filter). If
the smooth pipe heat exchanger is not used during the operation of the storage tank (e.g. HP only) then this
must be completely filled with a glycol mixture to avoid corrosion due to the resulting condensation. After it
has been filled up, the filled smooth pipe heat exchanger must not be closed off at both ends (pressure
expansion due to temperature).
If the HP uses air from the environment in the room, the space must be at least 30 m
The water pipe must be connected in accordance with the norms and regulations which apply to the
connection of water heaters. How to connect the water pipe is shown in Figure 3. The maximum pressure in
the water pipe must not be more than 6 bar. The smooth pipe heat exchanger must be professionally flushed
ugh before carrying out the initial installation (in addition we recommend the installation of a dirt filter). If
the smooth pipe heat exchanger is not used during the operation of the storage tank (e.g. HP only) then this
glycol mixture to avoid corrosion due to the resulting condensation. After it
has been filled up, the filled smooth pipe heat exchanger must not be closed off at both ends (pressure
16
If the HP uses air from the environment in the room, the space must be at least 30 m
3
.
norms and regulations which apply to the
connection of water heaters. How to connect the water pipe is shown in Figure 3. The maximum pressure in
the water pipe must not be more than 6 bar. The smooth pipe heat exchanger must be professionally flushed
ugh before carrying out the initial installation (in addition we recommend the installation of a dirt filter). If
the smooth pipe heat exchanger is not used during the operation of the storage tank (e.g. HP only) then this
glycol mixture to avoid corrosion due to the resulting condensation. After it
has been filled up, the filled smooth pipe heat exchanger must not be closed off at both ends (pressure
