english
5
Osca
Floor load capacity
Make sure that the load capacity of the supporting
construction is sufficient to carry the weight of the
entire unit, before the heating unit is installed.
Combustion air
Being the user of the stove you must take care of a
sufficient combustion air supply. Sealed-up windows and
doors may not allow a sufficient combustion air supply or
disturb the draught behaviour of your stove. Please
ensure the additional supply of fresh combustion air if
necessary. For details please consult your specialist
retailer. Make sure that the combustion air intakes are
not blocked!
Stove pipe connection
For your own safety stringent laws apply for connecting
the stove pipes to the chimney. Your professional dealer
or distributor knows these laws. Please have your
certified retailer carry out the connection of your stove
.
3.
CORRECT OPERATION OF YOUR STOVE
The operation is described in the enclosed user manual.
Accessories
You can obtain floor plates made of glass or steel, care products or the Heat Memory System for heat storage from
your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your stove functions
properly and safely.
The fireplae must not be altered.
Maintenance
To clean the glass, please use a specialised product such as Thermohit glass cleaner. Lacquered surfaces are to be
cleaned only with a cloth (may be damp).
ATTENTION:
Only gaskets in good order ensure the proper function of your stove
!
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year
– if necessary more
often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by the chimneysweeper.
Your chimneysweeper will inform you of the necessary inspection intervals. An expert should inspect the stove
annually.
