3
1.3. Description of models/measures
The Austroflamm aquaHEAT inserts described in this instruction are manufactured and certified with self-closing
doors (type A1) according to DIN EN 13229.
45x51-aquaHEAT
65x51-aquaHEAT
1.4. Installation of the insert
1.5. Positioning of the insert
Place the insert on the prepared floor
with the necessary load-bearing
capacity and adjust the legs with an
allen screw SW24. (see also 9.6.
floor protection).
ATTENTION:
it is absolutely necessary to mind the guidelines for fire prevention, like
insulation and air grid sizes. If the insert is operated with too much fuel, there will be a danger
of overheating the chimney and other adjoining elements/furniture.
FIRE HAZARD!!!
TH_TAS … thermowell for thermal flow safeguard - G ½ " IG
SVL………..flow for safety heat exchanger R ½ "
SRL ……….return for safety heat exchanger R ½ "
VL…………flow R ¾ "
RL…………return R ¾ "
SV…………safety valve G ½" IG
THl………..thermowell G ½" IG