24
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the
ECUs in the vehicle
’s systems in order to locate and retrieve DTCs. The
sample operation screen of Auto Scan displays as below:
1. Navigation Bar
2. Main Section
3. Functional Buttons
Navigation Bar
List Tab
– displays the scanned data in list format.
Progress Bar
– indicates the test progress.
Main Section
Column 1
– displays the sequence numbers.
Column 2
– displays the scanned systems.
Column 3
– displays the diagnostic marks indicating different conditions of
the test result:
-!-
:
Indicates that the scanned system may not support the code
reading function, or there is a communication error between the
Display Tablet and the control system.
-?-
: Indicates that the vehicle control system has been detected, but
the Display Tablet cannot accurately locate it.
Fault(s) | #
: Fault(s) indicates there is/are detected fault code(s)
Figure 4-10
Sample Auto Scan Operation Screen
