29
Search
– tap this icon to search the fault code related information in
Google.
ESC
– tap it to return to the previous screen or exit the function.
Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have
been carried out, you can erase the codes from the vehicle using this function.
Before performing this function, make sure the vehicle
’s ignition key is in the
ON (RUN) position with the engine off.
To erase codes
1. Tap
Erase Codes
from the Function Menu.
2. A warning message displays to inform you of data loss when this
function is applied.
a) Tap
Yes
to continue. A confirming screen displays when the
operation is successfully done.
b) Tap
No
to exit.
3. Tap
ESC
on the confirming screen to exit Erase Codes.
4. Perform the Read Codes function again to check if the code erasing
is successful.
Live Data
When this function is selected, the screen displays the data list for the
selected module. The items available for any control module vary from one
vehicle to another. The parameters display in the order that they are
transmitted by the ECM, so expect variation between vehicles.
Gesture scrolling allows you to quickly move through the data list. Simply
swipe the screen up or down to locate the data you want. The figure below
shows a typical Live Data screen:
