9
A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBD II cable.
3)
Plug the cable into the vehicle’s DLC.
4)
Power up the scan tool, and wait for the
Main Screen
to appear.
(Figure 3.1)
Figure 3.1
3.6
System Setup
The system Setup functions allow you to adjust default settings and
view information about the scan tool.
1)
Language:
Selects the desired language.
2)
Unit of Measure:
Sets the unit of measure to English or Metric.
3)
Beep Set:
Turns on/off the beep.
4)
LCD Test:
Checks if the LCD display is working properly.
5)
Key Test:
Checks if the keyboard is working properly.
6)
About:
Provides information of the scan tool.
Settings of the unit will remain until a change to the existing
settings is made.
To enter the Setup menu
From the
Main Screen,
use
LEFT/RIGHT
scroll button to select
Setup
, and press the
OK
button. Following the instructions to make
