13
About
The
About
function allows viewing of some important information
such as serial number and software version number of the scanner.
1)
From
Setup
screen, use the
UP/DOWN
scroll button and
LEFT/RIGHT
scroll button to select
About
and press the
OK
button; wait for the
About
screen to appear.
2)
View tool information on the screen. Press the
ESC
button to exit.
3.7
Vehicle Coverage
On the basis of all OBD II compliant vehicles, including those
equipped with universal protocol -- Control Area Network (CAN),
MaxiDiag
MD805 Scanner expands vehicle system coverage and
offers more diagnostic power to the vehicle technicians. Featuring
expanded global vehicle coverage, the scan tool offers technicians a
significant improvement on model years covered by supported
manufacturers.
For a complete listing of all the added vehicle coverage, download a
copy of the official Software Release Note.
3.8
Product Troubleshooting
Vehicle Linking Error
A communication error occurs if the scan tool fails to communicate
with the vehicle’s ECU (Electronic Control Unit). You need to do
the following to check up:
Verify that the ignition is ON.
Check if the scan tool’s connector is securely connected to the
vehicle’s DLC.
Turn the ignition off and wait for about 10 seconds. Turn on the
ignition again and continue the testing.
Verify the control module is not defective.
Operating Error
