23
Figure 5.16
You can check the details of each system, quickly erase DTC, save
the data, and display DTC from the
Auto Scan
menu screen. To
select the options on the bottom, simply press the corresponding
function button.
Save
– this option allows you to save the Auto Scan information
as “Vehicle Record” so that you will not need to follow the
vehicle selection process again on the same vehicle in later tests.
For detailed instructions, please refer to
5.2.4 Save and retrieve
files
.
Quick Erase
– this option allows you to erase all displaying
DTCs and read the data once again and check the latest status of
the system. If a fault is not fixed, its trouble code will keep on
displaying.
Display DTC
– this option allows you to read DTC definitions
in the highlighted system. If more than one fault is detected in a
system, the scan tool will display a list for you to view different
kinds of DTCs or freeze frames.
In
Auto Scan
screen (Figure 5.16), pressing the
OK
button will turn
to diagnostic operation. For more details, refer to
5.3 Diagnostic
Operation
.
To exit the
Auto Scan
option, press the
ESC
button. The scan tool
will display a message “
Are you sure to quit?
” to ask for your
confirmation. Select
Yes
to quit, or select
No
to cancel the command.
100% Auto Scan
PCM- Powertrain Fault 1
Control Module
Quick Erase Save Display DTC
