10
Accessories Included
1)
User Manual
– instructions on tool operations.
2)
Quick Guide
– instructions on registering tool and updating software.
3)
OBDII Cable
– used to connect tool to vehicle for communication and
to power tool.
4)
USB Cable
– used to print retrieved data.
5)
Protective Nylon Case
– used to store the tool when not in use.
6)
TF Card
–
used to store data and to upgrade the scan tool.
Keyboard
No solvents such as alcohol are allowed to clean the keypad or display. Use
a mild nonabrasive detergent and a soft cotton cloth. Do not soak the
keypad as the keypad is not waterproof.
Power
The scan tool is powered via the vehicle Data
Link Connector (DLC). Just
follow the steps below to turn on the scan tool:
1) Connect the OBD II Cable to scan tool.
2) Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you need to
remove it before attaching the OBDII cable.
3) Plug OBD II c
able to the vehicle’s DLC.
4) Power up the scan tool, and wait for the Main Screen to appear.
Figure 2-2