ase codes, use the button next to
ERASE
4)
To er
.
rni
P0238 Pd ERASE
►
21
5)
A wa
onfirmation.
ng message comes up asking for your c
u w
6)
If yo
des are cleared
7)
AU
ish to erase codes, press
YES
. When co
successfully, an “Erase Done!” message comes up and the tool
rescans the vehicle to verify. If codes are not cleared, a
“Failed!” message appears.
If you do not wish to erase code, press
NO
button to exit, and
a “Canceled” message comes up in the screen.
C
TION: Erasing the Diagnostic Trouble Codes may allow the
trip computer to delete not only the codes from the vehicle’s
on-board computer, but also “Freeze Frame” data and
manufacturer enhanced data. Further, the I/M Readiness
Monitor Status for all vehicle monitors is reset to Not Ready or
Not Complete status. Do not erase the codes before the system
has been checked completely by a technician.
Retrieving I/M Readiness Status
5.2
operations of the
1) P
◄
YES
NO
►
◄
6/6
Erase Codes ?
I/M Readiness function is used to check the
Emission System on OBD2 compliant vehicles.
9
“OK”
-- Indicates that a particular monitor being checked has
completed its diagnostic testing.
9
“NC”
-- Indicates that a particular monitor being checked has
not completed its diagnostic testing.
9
“NA”
-- The monitor is not supported on that vehicle.
ress the button next to
I/M
to view I/M readiness status.
DTC I/M
►
◄
FRZD VIN
►
