28
SMS COMMANDS AND NOTIFICATIONS
You can configure and control COMPASS GSM/GPS
tracker by SMS commands, sent from your mobile
phone to the SIM-card phone number that is installed
in tracker.
For most cases password is required to execute SMS
command. Some commands can be executed with no
password - to do this your phone number should be
set in the system as master-phone. Otherwise you
must
enter the password for each SMS command.
ATTENTION!
By default the password is
1234
. We
strongly recommend to change it before you start to
use COMPASS GSM/GPS tracker (see p.30).
ATTENTION!
If COMPASS GSM/GPS tracker is operating
in the Beacon mode, then SMS commands are received
and executed only upon wake-up. Thus the SMS
confirmation to your command may come after a long
time.