38
• Password - from 8 to 64 symbols with no spaces
(Latin letters, numbers, special characters)
•
First Name and Last Name - at least 3 symbols
(letters, spaces, dashes). Don’t use spaces and
dashes in the beginning and the ending of the
words.
3.
Pair COMPASS GSM/GPS tracker with the created
account. Use the plastic card from the set with a
serial number and an
open PIN-code
.
ATTENTION!
Don’t erase protective layer from the
plastic card! PIN-codes under the protective layer
are intended for car’s owner registration. To pair
COMPASS GSM/GPS use
only opened PIN-code
.
Opened PIN-code can be used only one time for
system registration and settings.
Tracker coordination with IGLA or AUTOSTART
After you have connected IGLA anti-theft system or/
and AUTOSTART module to CAN-bus, it is necessary
to coordinate them with COMPASS GSM/GPS for joint
work:
1.
12V power to the devices.
2.
Switch IGLA system to PIN-code change mode and
AUTOSTART module to Firmware update mode (see
operating manuals).
Don’t switch OFF the ignition!
3. Open
Author Connect
mobile app and on Control
screen press SETTINGS button.