34
1. Retrieve the power supply elements out of all the key fobs
(including the key fobs previously added to the system)
and turn off the Bluetooth on all the smartphones.
2. Erase all the key fobs previously recorded in the
system memory and turn off the ignition.
3. Enter the key fobs recording mode:
• turn on the ignition;
• sign in with the PIN-code;
• press the accelerator
1
to the floor and keep it pressed;
• repeat the previously entered PIN-code;
• release the accelerator* after the indication
signals begin to appear (once in three seconds);
• press the service/valet button** twice.
The coverage zone radius is limited. For successful
key fobs connection, they should be placed as close
to the device as possible (up to one meter).
4. Press the button on the key fob print and keep it
pressed.
5. Insert the power supplying element into the new key
fob. The diode on the key fob will start flashing with
green once in a second.
6. Release the button. The fact of successful key fob
connection will be confirmed with the red diode
light.
The second key fob may be connected right after
the first one without leaving the key fob recording
mode. The second key fob may be connected later;
in this case the key fob deleting procedure is not
required.
7. Turn off the ignition.
1 See the official website: https://service.author-alarm.com/
!
!
