1-877-646-5288
7
This accessory pack includes the 24 oz. Stainless Steel Nutri Ninja
®
Cup and Sip
& Seal
®
lid and is to be used with your Pro Extractor Blades
®
that came with your
blender. Motor base may vary depending on unit purchased.
IMPORTANT: MAKE SURE THAT THE MOTOR BASE IS PLUGGED IN FOR
USE. NO LIGHTS WILL TURN ON.
IMPORTANT: DO NOT OVERFILL! TO AVOID SPILLING, DO NOT ADD
INGREDIENTS PAST THE “MAX FILL” LINE.
1
Remove all packaging material and labels from the cup.
2
The 24 oz. Stainless Steel Nutri Ninja
®
Cup should be hand washed in warm,
soapy water with a soft cloth. It is
NOT
dishwasher safe. The Sip & Seal
®
lid
and the blade assembly may be washed on the top rack of the dishwasher or
by hand.
CAUTION: Handle the blade assembly with care when washing as the
blades are very sharp.
3
Rinse and dry thoroughly.
IMPORTANT: Place the motor base of the main unit used on a clean,
dry, level surface such as a counter or table top.
4 When loading the cup, start by adding fresh fruits and vegetables, next
add leafy greens and herbs. Pour in liquid or Yogurt next. For thinner
results or a more juice-like drink, add liquid as desired. Next Add any
dry or sticky ingredients. Top off with ice or frozen ingredients.
5
Place the blade assembly onto the cup and twist it on tightly, clockwise, until
you have a good seal.
(Fig. 1)
Using the 24 oz. Stainless Steel Nutri Ninja
®
Cup
WARNING: NEVER LEAVE THE APPLIANCE UNATTENDED WHILE
IN USE.
CAUTION: USE CAUTION WHEN HANDLING THE BLADE
ASSEMBLIES AS THE BLADES ARE VERY SHARP.
CAUTION: DO NOT BLEND HOT FOODS OR HOT LIQUIDS IN THE
24 OZ. STAINLESS STEEL NUTRI NINJA
®
CUP.
CAUTION: Do not put hot liquids in the Stainless Steel 24 oz.
Ninja Cup before blending. Start with cool or room temperature
liquid. Heated liquid can create internal pressure in a sealed
cup, which may erupt on opening and cause a burn injury.
