2
23
CONGRATULATIONS!
You have purchased one of Auto Meter's hand-held Charging System
Analyzers. It is designed to test each component of a vehicle's electrical
system with greater speed and accuracy. If you should have any ques-
tions about your tester, testing procedures, or service see page 24 for
contact information.
BVA 200s
Load Test Capacity..................120 Amp
Battery sizes ...........................200-1600 CCA
Digital Back-Lit Display ..........1" x 2.5" - 4 line x 16 character
Volt Ranges .............................Digital 0-30
Cooling ....................................Vented
Leads ......................................Load Amp-2 1/2 ft., 6 Gauge
Size .........................................5 7/8" x 9 1/2" x 1 7/8"
Memory ...................................stores the last 200 tests
Internal Battery ........................9 Volt Alkaline
Optional
SWAC-20s
................Infrared printer and carrying case
Optional SWAC
-
19s ................
SWBVA-200s Carrying case only
Optional AC-12
.......................PC Interface adapter cord
Weight .....................................4 lbs.
What to Expect from the SWBVA-200s:
Immediately recognize a bad battery and perform a complete charg-
ing system analysis
.
The SWBVA-200s is a portable full-featured
menu-driven battery tester and charging system analyzer that provides
quick, professional load results using Auto Meter's Pulsed Differential
Load. Quick battery checks will increase charging productivity. The
SWBVA-200s is user friendly. It tells you what to do. The stator-diode
test automatically indicates open or shorted stator-diodes. It is profes-
sionally accurate. Detailed test results are LCD displayed after each test
or can be reviewed and/or printed from memory.
Caution:
The SWBVA-200s grill may get hot after repeated use. Be sure
to hold the unit from the side grips only. Keep hands away from the grill.
LIMITED WARRANTY
36 MONTHS FROM DATE OF PURCHASE-
CABLES 90 DAYS
The manufacturer warrants to the consumer that this product
will be free from defects in material or workmanship for a
period of twelve (36) months from the date of original pur-
chase.
Products that fail within this 36 month warranty period will
be repaired or replaced at the manufacturer's option to the
consumer, when determined by the manufacturer that the
product failed due to defects in material or workmanship. This
warranty is limited to the repair or replacement of parts and
the necessary labor by the manufacturer to effect the repair or
replacement of the product. In no event shall the manufacturer
be responsible for special, incidental or consequential damages
or costs incurred due to the failure of this product.
Improper use, accident, water damage, abuse, unauthorized
repairs or alterations voids this warranty. The manufacturer
disclaims any liability or consequential damages due to breach
of any written or implied warranty on its test equipment.
WARRANTY AND SERVICE INFORMATION
Warranty claims to the manufacturer's service department
must be transportation prepaid and accompanied with dated
proof of purchase. This warranty applies only to the original
purchaser and is non-transferable. Shipper damage incurred
during return shipments is not covered under this warranty. It
is the responsibility of the shipper (the customer returning the
Test Equipment) to package the tester properly to prevent any
damage during return shipment. Repair costs for such damages
will be charged back to shipper (customer returning the Test
Equipment). Protect the product By shipping in original carton
or add plenty of over-pack cushioning such as crumpled up
newspaper.
