background image

                                                                                  

 

4

Auto Page, Inc. has over 25 years of experience in the vehicle security industry in the 
United States and is a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan.  
Iwata has been an industry leader for over 50 years, establishing a reputation for 
ingenuity in its engineering capability and innovative communication products.  Auto 
Page and Iwata maintain a long tradition of providing the best value to their customers.    
 

 

TRANSMITTERS  
 

The RS727A comes with two transmitters.  The XT72LCD is a 2-way transmitter and 
receiver, also referred to as a transceiver.  The XT -65 is a mini-size 1-way transmitter.  
Both operate on the AM band with a code-rolling feature that will prevent any illegal use 
of a code-grabber attempting to record and steal the codes of your transmitter. 
 

CHANGING THE BATTERY IN YOUR TRANSMITTERS 

 
XT-73LCD:  

This transmitter uses a standard 1.5-volt AAA battery.  Information on 

changing the battery can be found on page 5 of this manual. 
 

XT-65:  

This transmitter uses one (1) 3-volt lithium ion battery (#CR2032) that is 

placed with the (+) side facing upward.  To replace the battery, you will need to use a 
small flat blade screwdriver and a small Philips screwdriver.  Remove the small 
Philips head screw. Then locate the small notch on the lower right side of the 
transmitter case next to the key ring.  Using the flat blade screwdriver, carefully pry the 
top case from the bottom case.  It should snap apart after  breaking the seal.  Before 
removing the battery note the direction of the positive (+) terminal.  Place the new 
battery in exactly the same manner, being careful not to bend or damage the contact 
terminal.  Snap the cases back together and then test the transmitter to insure it arms 
and disarms the alarm. Reinstall the Philips screw to finalize the battery replacement.  

 

       XT-65 

Extended Range Sliding Cover remote 

 
 
 

  CR2032 

3-Volt Battery

 

 

 
 

Summary of Contents for C3-RS-727A LCD



























Reviews: