Auto Page RF-302, Operation Instructions Manual

RF-302 

11

AUTOPAGE ALARM ACCESSORIES 

AP-4000DX Paging System 

 
Vehicle security paging was originated by AutoPage over 18 years ago.  
The AP4000DX is our latest version providing a full four watts of output 
power to signal a handsome belt-clip paging receiver indicating your 
RF-302 has been triggered, even if you cannot hear the siren. 
 

RS-32 Dual Stage Perimeter Protection Sensor 

 
The RS-32 uses a microwave frequency to detect field disturbance 
within a contained area.  The RS-32 is ideal for detecting a violation into 
convertibles and any open space which does not have physical 
protective barriers. Any movement within the field will trigger the RF-302. 
 

SIS-3 Glass/Shock Sensor 

 
Our top selling and extremely reliable electronic glass/shock sensor, the 
SIS-3 can be finely adjusted for each installation, from sports cars to 
trucks.  When properly adjusted, it virtually eliminates false triggers 
typically caused by inferior sensors. 
 

SIS-10 Air Movement Sensor 

 
The SIS-10 super low frequency vibration sensor has successfully 
integrated an electret electrostatic transducer and low pass filter, 
creating a new and cost effective air movement sensor.  If installed in a  
closed vehicle, any movement of air inside the vehicle which may be 
caused by opening a door will trigger the sensor.  Applications of the 
SIS-10 are limitless.  It will be ideal to monitor a vehicle’s doors, trunk or 
hatch, an RV, a closed cabin on a vessel and so on.  The SIS-10 can 
also replace glass breakage sensors.  The advantage of the SIS-10 is 
that a single SIS-10 can cover all the doors, rear hatch, windows and 
sun roof even if there is no pin switch.  Like other AutoPage SIS