9-12
FITTED EQUIPMENT
Air conditioning system
Icon Operating
Description
mode
-
OFF
Fan is switched off. (only
selectable if no unit is in
operation).
a
-
-
b
LOW
Low fan level
c
MID
Medium fan level
d
HIGH
High fan level
e
NIGHT
Especially quiet fan
operation
Set time switch
-
The time switch can only be selected if
the time has been set at the control
panel.
-
When air conditioning systems are being
operated, the control panel time switch
must only be used to clearly define the
start and end time for a required period of
time.
-
If the time switch has been activated
(ON), the deactivate time switch menu is
displayed first (OFF).
-
Select icon in menu bar (4) with rotary
push button.
-
Change by tapping in setting level.
Enter start time
-
Set the hours then
the minutes with the
rotary push button.
Enter finish time
-
Set the hours then
the minutes with the
rotary push button.
If the start/end point was exceeded during
entry, the operating parameters are not taken
into consideration until the next start/end
point has been reached. Until then, the
operating parameters that have been set
outside the time switch remain valid.
Set room temperature
-
Select heating or air
conditioning system
using the rotary push
button, depending on
the unit that is
connected.
-
Tap rotary push
button to confirm selection.
-
Select required room temperature with
rotary push button.
-
Tap rotary push button to confirm value.
Set hot water level
-
Select required hot
water level with
rotary push button.
-
Tap rotary push
button to confirm
value.
Select energy source
-
Select required
energy source with
rotary push button.
-
Tap rotary push
button to confirm
value.
The select energy type menu is displayed if a
heating system with electric heating elements
is connected.
Select fan level
-
Select desired fan
level with rotary push
button.
-
Tap rotary push
button to confirm
value.
The select fan level menu is only displayed if
heating system/hot water has been set.
Summary of Contents for Topaz
