P. 20
Installation Guide
MODE 4
*indicates default setting
FUNCTION 1 – Relock
OPTION 1
Disabled
OPTION 2*
Enabled – Relocks all doors 30 seconds after unlocking if neither doors nor trunk are
opened.
FUNCTION 2 – Pager (Pager sold separately)
OPTION 1
Pager ENABLED
OPTION 2*
Pager DISABLED
FUNCTION 3 – Ready Mode Option
OPTION 1
Enabled by handbrake
OPTION 2*
Enabled by remote
FUNCTION 4 – Bypass
OPTION 1
ADS
OPTION 2*
Xpresskit
OPTION 3
Fortin
FUNCTION 5 – Bypass Type
OPTION 1
One Way communication
OPTION 2*
Two Way communication ( For Xpresskit bypass ONLY)
Virtual
Tach
System
Virtual Tach System combines the latest microcontroller technology and a complex algorithm that
took years to develop. VTS is able to effectively monitor the engine starting sequence and release
the starter at the right time without physically connecting the tach wire to the remote starter. The
VTS constantly monitors the data and readjusts itself automatically in order to maximize its
capability to start the engine properly in any weather or deteriorating battery condition
Note: Virtual Tach System is only available in automatic transmission.
Optional
Time
Delay
Adjustment
in
Virtual
Tach
System
Follow these steps to program crank time adjustment, if needed:
1.
Enter programming mode (page-17)
⎯
the parking lights will stay on for up to 20
seconds.
2.
Before the lights go out, press and hold the brake pedal and press the
and
buttons simultaneously
⎯
Siren will chirps 4 times. Do not release the brake pedal.
3.
Press the
button if you wish to increase the time delay or the
button if you want
to decrease it. The time delay will be increased or decreased by 50ms. and the parking
lights will flash once if the
is pressed or twice if the
button is pressed.
4.
Press the
button to save the settings you have entered. The parking lights will flash
5 times.
5.
Release the brake pedal – the time delay programming is now complete.