background image

Vehicle Space Heater Truma Combi 4E/6E

Truma Combi 4E/6E

Select power type

• Click to change to the  

  setting level.
•  Use the control knob / push button to select 

the power type.

•  Click the control knob / push button to confirm  

the value.

Select fan level

• Click to change to the  

  setting level.
•  Use the control knob / push button to select 

the required fan level.

•  Click the control knob / push button to confirm  

the value.

Activate the timer (ON)

•  Click to change to the  

setting level.

•  Use the control knob / push button to activate 

the timer (ON)

•  Click the control knob / push button to  

confirm the value.

Deactivate the timer 

(OFF)

• Click to change to the  

  setting level.
•  Use the control knob / push button to 

deactivate the timer (OFF)

•  Click the control knob / push button to  

confirm the value set time

• The hour display flashes.
•  Use the control knob / push 

button to set the hours  

(24 h mode).

•  After clicking the control knob / push button 

again, the minute display will flash.

•  Use the control knob / push button to set  

the minutes.

•  Click the control knob / push button to  

confirm the value.

Display mains voltage 230 V
The symbol indicates that 230 V mains voltage 

(shore power) is available.

Summary of Contents for Imala 615 2020







































































Reviews: