English
12
1. AWC MANUAL Mode (One-time AWC)
In this mode, users have to manually start the AWC process.
1) Touch to choose AWC MANUAL mode.
2) Touch to set the refilling speed if needed.
* Please refer to Refilling Speed Setting.
3) Touch to start water change process.*
*When water change is done, flashes for 3 minutes with 5 beeps at last.
* Since the timer is not running during a power outage, the next water change process will be delayed.
For example, if a water change process is set to be started at 3 p.m., however, a power outage occurs
during the countdown and lasts for one hour, the next water change process will be started at 4 p.m.
1. ATO will be turned off automatically (ATO flashing ) after restoration of
power as if its previous status is on. It will be turned back on after 15 minutes
automatically. Users could also turn it back on manually.
2. When the power outage occurs during the draining or refilling process, the
process will be delayed for 15 minutes after restoration of power and then resume.
3. When the power outage occurs during the countdown to water change (the
timer will pause during power outage)*, the timer will retain the record and
resume after power outage.
Power Outage Security Measures
Programming
OFF
OFF
OFF
