UP
Position
Figure 14
The Cab Latch Hooks securing the cab to the
frame are at this point automatically released.
This will be evident when the pins at the rear of
the hydraulic latch extend from the latch body
(Figure 15).
Indicator Pin
(Latch Open)
Latch Jaw
Figure 15
The hydraulic cylinders then lift the cab until
the midpoint (top) is reached. Once the cab
has reached midpoint, the cab will move
forward to the fully open position. As the cab
is raised the safety lock rod will automatically
drop into each of the notches as the cab is
raised (Figure 16).
Figure 16
DANGER
Never rely on the hydraulic pressure to
hold the cab in a partially open position.
Always use ensure the safety lock is
engaged to prevent serious personal
injury or death.
Velocity fuses are incorporated into the cab tilt
cylinder ports to control the cab’s movement
past the midpoint (top) when raising and
lowering the cab. The fuses also act as a
safety valve to prevent the cab from falling
unchecked in the event of a hydraulic system
failure.
877-973-3486
AWE 00054 Rev. 002
16
ACTT Xspotter Operator Manual
Summary of Contents for Xspotter 2014
Page 2: ......
Page 4: ...This page left blank intentionally ...
Page 116: ...Notes 877 973 3486 AWE 00054 Rev 002 104 ACTT Xspotter Operator Manual ...
Page 117: ......
