Color
Function
Type
Required
Pink
Power(+12V)
Input
Yes
White
Accessory
Relayed output
Yes
Yellow
Starter
Relayed output
Yes
Blue
IGN1
Relayed output
Yes
Green
IGN2
Relayed output
Maybe
Black
Ground
Input
Yes
Color
Function
Type
Required
White/Black
Ignition 3
(-) 400mA
No
Brown/White Alarm Disable
(-) 400mA
No
Brown
Accessory Pulse (-) 400 mA
No
Blue
Horn
(-) 400 mA
No
Yellow
Lights
(-) 400 mA
No
Control Harness
Wiring Diagram
Power Harness
Color
Function
Type
Required
Orange
Brake
Input
Yes
Violet
Hood
Input
Yes
Green
Tach
Input
No
Red/White
Remote
Input
No
Red/Black
Control Switch Input
Yes
Left - Option Right - Code Learn
LED
AutoCommand
®
Model 20023
Remote Control Car Starter Installation Manual
V 7.1
Tools required to install the AutoCommand
®
Unit:
Wire Cutters/Strippers
Soldering Iron
Pliers
Testmeter
Screwdrivers
Drill
We highly recommend that all connections be soldered for reliability.
Parts List:
Auto Command Module
Transmitter
Control Harness (10 position) 6 Power & Ignition wires
Antenna
Parts Kit in plastic baggy:
Alcohol Pad 30 A Fuse
2 Antenna Clips with Adhesive Pads
Hood Pin Switch Set
2 Cable Ties
On/Off Control Switch
Warning Label
Window Decal
Ring Terminal
WARNING
This car is equipped with a remote control starting device.
Disable before working on car!
AVERTISSEMENT
Co véhicule est équipé d’un systéme de démarrage á distance. Mettez-le hors
fonctuin avant d’eflectuer toule opération d’entretian ou de répanation!
Alchohol
Pad
DesignTech International, Inc. • 7955 Cameron Brown Court • Springfield, Virginia 22153 USA • 703-866-2000 or 800-337-4468
Congratulations on your purchase of the AutoCommand
®
Remote Car Starter. The AutoCommand
®
Remote Car Starter system
allows you to start the car by remote control from the comfort of your home or office in order to cool it down in the summer or
heat it up in the winter.
AutoCommand
®
is for automatic transmission cars only. It is an extremely sophisticated system with multiple built-in safety and
security features.
The AutoCommand
®
Remote Car Starter:
• Will start your car by remote control, and run the heater, defroster, or air conditioner to warm up or cool down the car.
• Is designed to start the car if it is in park, and only if the hood is closed.
• Can monitor the engine’s speed using a special tachometer monitoring circuit, and will cut off the ignition if the car stalls.
• Will attempt to start the car for up to six seconds, but no longer (to avoid damage to the starter motor). Should the car
not start, or if it stalls after starting, the AutoCommand® will make two further attempts to start it.
• Will not let the car be driven without the key in the ignition.
• Shuts itself off automatically after 10 or 15 minutes (user option) if you forget to come out to your car.
• Will shut off if the brake pedal is pushed, the hood is opened, or the transmission is shifted out of park - unless the key is in
the ignition and in the “run” position.
• Allows you to remove the key while leaving the car running with the doors locked for up to 10 or 15 minutes utilizing the
QUICK STOP
TM
option.
• Starts the car automatically whenever the temperature drops below 0
o
F (-18
o
C), rises above 140
o
F (78
o
C), or if the battery
voltage drops below 11 volts with the Cold Start option activated.
• Is quality engineered, microprocessor controlled, and made in the USA to provide many years of reliable use.
• Comes with a 2 year warranty.
White - Option
Red
(Not Used)
No
Circuit
Circuit
(+)
(-)
(-)
(-)
Coax
Antenna Jack
ON/OFF Switch Jack
