background image

USER TIPS AND NOTES

The Remote Car Starter must be “enabled” each time the driver has finished driving and

taken out the key in order for the unit to start the vehicle remotely

.          After the key has been

removed, you must turn OFF the  control switch and then turn it back ON again while no key is in the

ignition.  This “control switch” or “set switch” prevents unauthorized starting of the car by someone

unfamiliar with the system who may be using the vehicle.  If you forget to set the switch, it may also be

activated by pushing the transmitter and holding the button down for ten seconds. T

o eliminate the need

for this, see 

Option #7

.

The AutoCommand

®

 Professional Series Remote Car Starter will turn the car off if the driver does not

insert and turn the key within 10 or 15 minutes.   

After the remote car starter has started your car

, simply

put in the key and turn it to the “run” or “on” ignition position (not the crank position) to drive away

.

The AutoCommand

®

 Professional Series Remote Car Starter has numerous safety and security features

that make it difficult to steal your car without the key being in the ignition.  Putting your car in gear

,

tapping the brake pedal or opening the hood will turn the unit off unless your key is in the ignition and

turned to the “run” or “on” position.

If all features are hooked up, your transmitter will function as follows:

Button 1:

Pressed Once: Lock the door / arm the alarm

Pressed Again: Unlock doors / disarm the alarm

Hold down for 4 seconds for Panic

Button 2:

Once:  Start the car with all accessories left on

Again: Stop the car

Button 3:

Once: T

urn on the headlights for 30 seconds

Again: T

urn off the headlights

Hold down for 4 seconds to open the T

runk.

The LED light on the transmitter will display 3 different colors – Green for Button #1, Red for Button #2,

and 

Yellow for Button #3. The transmitter is powered by a long life lithium battery (CR 2032 or DesignT

ech

catalog # 20059). The transmitter and the remote starter receiver module are FCC and DOC approved.

Alarm Disarm without transmitter:

          If the doors are locked and the alarm is set and you’ve lost your

transmitter

, you can disable the alarm.  Here is how:  Enter the vehicle (alarm will sound) and insert the

key and turn it to the ‘run’

 position (the position where the dash lights come on).  T

urn the On/Off switch

off and on 4 times in a row to disable the alarm.

Valet Mode:

          T

urning the Control switch off puts you in V

alet Mode. In V

alet Mode the Remote Car

Starter and the alarm will not function. This lets you turn off the car starter when having the vehicle

serviced. The only functions that work in V

alet Mode are the keyless entry

, lights and panic. The red LED

dash light will flash twice every few seconds when in V

alet Mode.

The Quick Stop Option

:

   

You can leave the car running and take the key with you for a quick visit to

a store. With the car running, push the Start button on the keychain transmitter just before pulling out the

key
. The car will run for 10 minutes or until you tap the brake or put the car in gear

.

The Cold Start Option

:

 This automatically starts and runs the car for the preset run time (10 or 15

minutes) if the temperature drops below 0

°

F or if the battery voltage drops below 1

1 volts. T

apping the

brake at any time after programming disables this feature. Here is how to set this feature: Hold the Start

button down while the vehicle starts, runs, turns off and the lights begin to flash 5 times. Release the

transmitter button. 

You have set the Cold Start Option™.

LIMITED  LIFETIME  WARRANTYLIMITED  LIFETIME  WARRANTYLIMITED  LIFETIME  WARRANTYLIMITED  LIFETIME  WARRANTYLIMITED  LIFETIME  WARRANTY

DesignT

ech Inter

national, Inc

.  

W

arrants to the orig

inal consumer/pur

chaser that this product shall be

free of defects in material and workmanship under normal use and circumstances for the period of

time that the or

ig

inal o

wner of this pr

oduct o

wns the v

ehicle in w

hic
h it is installed.  

When the

original consumer/purchaser r

etur

ns the product pre-paid to DesignT

ech International Inc., 7955

Cameron Bro

wn Court,

 Springf

ield, 

V

irg

inia 22153,

 USA within the w

arranty period

, and if the

product is defecti

v

e DesignT

ech International, Inc. will at its option repair or replace such.

This w

arranty shall constitute the sole liability of DesignT

ech International, Inc. concerning the product.

DesignT

ech International, Inc. e

xpressly disclaims all other w

ar

ranties INCLUDING

WITHOUT

LIMIT

A

TION

, THE 

W

ARRANTIES OF MERCHANT 

ABILITY 

AND FITNESS FOR 

A P
A

R

TICU-

LAR PURPOSE.  NO PERSON, FIRM ,

 OR CORPORA

TION IS 

A

UTHORIZED 

T

O

 ASSUME

FOR DESIGNTECH INTERN

A

TION

AL, INC. 

ANY O

THER LIABILITY IN CONNECTION 

WITH

THE SALE 

AND USE OF 

THE PR

ODUCT

.  DesignT

ech International, Inc

. and a

gents and distrib

u

-

tors will bear no liability whatsoe

v

er for incidental or consequential dama

ges or c

har
ges of an

y kind.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above disclaimer regarding incidental or consequential damages may not apply to you.

Please completely fill out the warranty registration card below and mail with copy of proof of purchase

to:
  DesignT

ech International, Inc., 7955 Cameron Bro

wn Court,

 Springf

ield, 

V

irginia 22153-2809,

USA within ten (10) days after date of purchase.

This warranty is void if the product or has been damaged or tampered with or if the product or any such

parts have been opened.  In all cases of damage during shipment, a claim must be filed with the shipping

carrier and not with DesignT

ec

h Intern

ational, Inc.

This warranty gives you specific legal rights; you may also have other rights which vary from state to

state.

OUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRSOUT OF WARRANTY REPAIRS

If the warranty card was not returned, or if you are not the original owner of the vehicle the product

w

as installed in, DesignT

ech International, Inc. will at its option either (1) r

eplace this product with a

functionally similar (but not necessarily visually identical) refurbished product or (2) repair the origi-

nal product and return it to the original consumer/purchaser after payment of repair/replacement

charges have been received.

Please return this warranty registration card within ten (10) days of purchase.

Name_________________________________________________________ User's 

Age_________

Address _________________________________________________________________________

City____________________________________ State__________________ Zip_______________

Phone Number:     Home___________________________            Office_______________________

Place of Purchase__________________________________       Date of Purchase________________

Product Purchased:

_________________________________

Price of Purchase:____________

V

ehicle Mak

e:__________________V

ehicle Model:________________Y

ear:__________

This 

product 

was 

purchased 

for:

( ) Myself            ( ) Spouse           ( ) Relative           ( ) Friend

How did you first become interested in this product?

( ) Retailer Ne

wspaper 

Ad

( ) Magazine 

Ad

In-Store 

Display

Ne
wspaper 

Ma
g

azine 

Article

( ) 

Mail 

Order

( ) Friend / Relative

( ) In-Store Salesperson

Other 

_____________________

__________ Please send me 

FREE 

inf
orma

tion on other inno

v

ati

v

e DesignT

ech products.

7955 Camer

on Br

o

wn Court,

 Springf

ield, 

V

ir

g

inia 22153,

 USA

T

el: 703-866-2000     F

ax: 703-866-2001

v3.1

Summary of Contents for 20024











Reviews: