Gold Plate
Guide
Head Balancing
2. If extra counter-balance weight is needed it can be
added by installing a counter-weight on the rear of the
Gold Plate. (
A
)
Head Balancing
1. To balance the head with the camera mounted,
loosen the rod adjustment clamps, the rods will now
slide freely back and forth. When you have achieved a
good balance retighten the knobs, this will secure the
plate in this position.
A
Counter-balance Weight
2kg/4.4lbs
1. Install the
counter-balance
weight by sliding it
over the two rods at
the rear of the Gold
Plate. Slide the weight
back and forth to
achieve a balance.
2. To lock the
weight in position
tighten the two
clamp screws on
either side.
Additional weights
can be added if
required.
