■
Enter
s
(Stretch), and press ENTER.
■
Use a crossing window to select the small piece of gypsum wallboard near the top.
The brick to the left is selected as well.
■
Hold down the SHIFT key and select the brick to remove it from the selection set.
Four objects are selected.
■
Press ENTER.
■
Verify Ortho is on, select any point in the drawing area, and move the cursor up.
■
Enter
1
, and press ENTER.
Add a hatch pattern to the door
16
Right-click the title bar of the tool palettes, and click All Palettes.
17
On the Drafting tool palette, click the Line Hatch tool.
18
In the drawing area, select a point in the rectangle to add line hatching to the door.
Horizontal hatching is added.
Modify the hatch pattern and position
19
Select the hatch and right-click for the context menu.
20
Select Properties.
21
On the Properties palette, select A-Detl-Patt for Layer.
22
Enter
.5
for Spacing.
23
Select Yes for Double.
Lesson 2:Working with Details | 165
