manualshive.com logo in svg

Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual

"Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual" is a comprehensive guide that provides step-by-step instructions and essential tips for efficiently utilizing the AutoCAD MEP 2010 software. Download this manual for free from 88.208.23.73:8080, empowering you to maximize your knowledge and skills in this powerful design tool.

Share
Download
background image

on page 747, and for multi-view blocks, see Multi-View Blocks. For information on blocks, see
“Create and Use Blocks (Symbols)” in the AutoCAD Online help.

Working with Style-Based Content

Objects that use styles are referred to as style-based content. Styles are sets of parameters that you assign to
objects to determine their appearance or function. Objects in AutoCAD MEP that use styles include schematic
symbols, devices, panels, and plumbing fittings. Styles define additional behaviors that traditional block-based
objects do not have. For example, a symbol style determines the appearance of the symbol in different views,
how connecting lines are trimmed, and the location and type of smart connectors used to create an intelligent
building system.

You can create style-based content by defining new object styles. You assign a style to all instances of an
object that share the same characteristics. For example, you can assign one symbol style to all 3-way float
valves and another symbol style to all 3-way pneumatic valves.

You can define the appearance of style-based content by assigning block-based graphics to specific views of
the style. This enables you to convert traditional block-based objects, such as symbols, into usable content
in AutoCAD MEP. Hundreds of add-on block-based objects are available from third-party vendors. Many
building product manufacturers provide inventories of block-based symbols, and many design offices now
sell libraries of custom block-based symbols. With the ability to create new styles, you can easily convert
symbol libraries into style-based content and customize AutoCAD MEP to suit your needs.

The key to working with style-based content is organizing the content in a logical way. You can organize
related style-based content in libraries and categorize the libraries into smaller subsets of related content.
To understand the operations, commands, and options available with style-based content in AutoCAD MEP,
it is important to understand how style-based content is stored and referenced in a drawing. Central to
working with style-based content is understanding style definitions.

NOTE

For information on creating style-based content, see 

Customizing Style-Based Content

 on page 599.

How Style-Based Content is Stored and Referenced

In AutoCAD MEP, schematic symbols, devices, panels, and plumbing fittings are style-based content. Each
piece of style-based content is defined by a style. You can create style definitions using Style Manager or
one of several conversion tools provided by the software. (For more information, see 

Customizing Style-Based

Content

 on page 599.) Style-based content can be stored in individual drawings; however, it is better to store

style-based content in libraries that can be categorized and accessed through the dialogs and worksheets in
the software.

A style definition is similar to an AutoCAD

®

 block definition, which consists of all information associated

with the block. Style definitions store all information associated with a piece of style-based content. The
key difference between a block definition and a style definition is that a block definition stores information
related only to appearance, whereas a style definition stores additional information related to function and
behavior. For example, a traditional block-based symbol definition stores the geometry of the symbol. A
style-based symbol definition stores the geometry of the symbol for each view direction. It also specifies
how connecting lines are trimmed, defines the location and type of smart connectors used to create intelligent
building systems, and determines the display properties of the symbol. For more information about defining
styles, see 

Configuring Styles

 on page 603.

Style definitions are referenced when you add style-based content to your drawing. AutoCAD MEP does not
copy information from the style definition to the drawing area. Instead, it establishes a link between the
style-based content and the style definition. If the style definition is changed, all references are updated.

Style-based content can be stored in libraries. Generally, your drawings include symbols that you draw
repeatedly, such as schematic symbols, devices, panels, and plumbing fittings. Style-based content libraries

Working with Style-Based Content | 85

Summary of Contents for 235B1-05A761-1301 - AutoCAD MEP 2010















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 235B1-05A761-1301 - AutoCAD MEP 2010

DAVIS Vantage Pro2 Updater Getting Started Manual preview
Vantage Pro2 Updater
Brand: DAVIS Pages: 12
TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
AMX RMS Administrator'S Manual preview
RMS
Brand: AMX Pages: 212
Sony Ericsson RS232 interface for GT47 embedded apps UART Application Note preview
RS232 interface for GT47 embedded apps UART
Brand: Sony Ericsson Pages: 14
Lexmark LexPrint User Manual preview
LexPrint
Brand: Lexmark Pages: 20
Novell LOGIN SCRIPTS Manual preview
LOGIN SCRIPTS
Brand: Novell Pages: 64
ROUTE 66 MAPS User Manual preview
MAPS
Brand: ROUTE 66 Pages: 28
R&S FSV-K7 Operating Manual preview
FSV-K7
Brand: R&S Pages: 262
Allied Telesis AT-9400 User Manual preview
AT-9400
Brand: Allied Telesis Pages: 668
ZyXEL Communications Auto Configuration Server Vantage Access Quick Start Manual preview
Auto Configuration Server Vantage Access
Brand: ZyXEL Communications Pages: 113
APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO User Manual preview
STRINGSTUDIO
Brand: APPLIED ACOUSTICS SYSTEMS Pages: 70
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Brand: Sierra Wireless Pages: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Brand: Sierra Wireless Pages: 16
FieldServer FS-8700-124 Driver Manual preview
FS-8700-124
Brand: FieldServer Pages: 17
FieldServer FS-8700-52 Driver Manual preview
FS-8700-52
Brand: FieldServer Pages: 17
Autodesk AUTOCAD P AND ID 2010 Brochure preview
AUTOCAD P AND ID 2010
Brand: Autodesk Pages: 4
Autodesk 657B1-000110-S001 - Maya - Mac Getting Started Manual preview
657B1-000110-S001 - Maya - Mac
Brand: Autodesk Pages: 5
Mackie FINAL MIX VST - FOR TRACKTION Manual preview
FINAL MIX VST - FOR TRACKTION
Brand: Mackie Pages: 26

Brands by name

Popular brands

Load more brands