manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual

Autodesk AutoCAD 2006 - a powerful software for drafting and designing, offering an extensive Command Reference Manual for easy navigation and optimized usage. Download this valuable manual for free from 88.208.23.73:8080, enhancing your AutoCAD skills and unlocking its full potential to create precise and dynamic designs.

Share
Download
background image

Use Points and Vectors........................................................................191
Use AutoLISP Variables........................................................................193
Use System Variables in Calculations..................................................193
Convert Units of Measurement...........................................................194
Use Standard Numeric Functions........................................................194
Calculate a Vector from Two Points....................................................195
Calculate the Length of a Vector.........................................................196
Obtain a Point by Cursor.....................................................................197
Obtain the Last-Specified Point...........................................................197
Use Snap Modes in Arithmetic Expressions.........................................197
Convert Points Between UCS and WCS..............................................198
Calculate a Point on a Line..................................................................199
Rotate a Point About an Axis...............................................................200
Obtain an Intersection Point...............................................................201
Calculate a Distance.............................................................................201
Obtain a Radius....................................................................................203
Obtain an Angle...................................................................................203
Calculate a Normal Vector...................................................................205
Use Shortcut Functions........................................................................206
CAMERA...............................................................................................207
CHAMFER.............................................................................................208
CHANGE..............................................................................................212
CHECKSTANDARDS.............................................................................217

Check Standards Dialog Box........................................................217

CHPROP...............................................................................................218
CIRCLE.................................................................................................221
CLEANSCREENON...............................................................................223
CLEANSCREENOFF..............................................................................224
CLOSE...................................................................................................224
CLOSEALL............................................................................................224
COLOR.................................................................................................224

Select Color Dialog Box................................................................225

Index Color Tab (Select Color Dialog Box)..........................225
True Color Tab (Select Color Dialog Box)............................226
Color Books Tab (Select Color Dialog Box)..........................228

COLOR Command Line...............................................................229

COMMANDLINE..................................................................................230
COMMANDLINEHIDE.........................................................................230
COMPILE..............................................................................................230
CONE....................................................................................................231
CONVERT.............................................................................................235
CONVERTCTB......................................................................................236
CONVERTPSTYLES...............................................................................237
COPY....................................................................................................238
COPYBASE............................................................................................239
COPYCLIP............................................................................................239

iv | Contents

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AUTOCAD 2006

3Com 3C16120 - SuperStack 3 Server Load Balancer Release Note preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 20
Ulead COOL 3D-PLUG-IN MADNESS II Manual preview
COOL 3D-PLUG-IN MADNESS II
Brand: Ulead Pages: 10
AMX RMS Administrator'S Manual preview
RMS
Brand: AMX Pages: 212
M-Audio Afro-Cuban Percussion Quick Start Manual preview
Afro-Cuban Percussion
Brand: M-Audio Pages: 5
F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Brand: F-SECURE Pages: 32
Xante PlateRunner P24 Processor Supplementary Manual preview
PlateRunner P24 Processor
Brand: Xante Pages: 6
Aastra Venture IP Telephone System Installation Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 12
Lucent Technologies Integrated Solution II System Manager'S Manual preview
Integrated Solution II
Brand: Lucent Technologies Pages: 177
EVGA PC-over-IP Administrative Interface User Manual preview
PC-over-IP Administrative Interface
Brand: EVGA Pages: 108
F-SECURE PSB - ADMINISTRATORS GUIDE FOR RESELLERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR RESELLERS
Brand: F-SECURE Pages: 48
Xerox 6100BD - Phaser Color Laser Printer User Manual preview
6100BD - Phaser Color Laser Printer
Brand: Xerox Pages: 56
KAPERSKY ANTI-VIRUS 5.6 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 130
FARONICS INSIGHT - TEACHER Quick Start Manual preview
INSIGHT - TEACHER
Brand: FARONICS Pages: 9
Epson PowerRIP Stylus User Manual preview
PowerRIP Stylus
Brand: Epson Pages: 80
Epson Scanner A3 User Manual preview
Scanner A3
Brand: Epson Pages: 16
Epson WorkForce Pro WP-4015 DN User Manual preview
WorkForce Pro WP-4015 DN
Brand: Epson Pages: 134
Sony VAIO VGN-TXN15P/B User Manual preview
VAIO VGN-TXN15P/B
Brand: Sony Pages: 172
Xtramus Network Device NuDOG-MPT User Manual preview
Network Device NuDOG-MPT
Brand: Xtramus Pages: 27

Brands by name

Popular brands

Load more brands