FORCE:
adjust the strength of resistance when meet obstructions during closing or
opening.
MT:
adjust the starting strength during soft star
TORQUE:
adjust the travel torque of motor:
can be adjust to avoid clamping when the door run into resistance. (Note: at
this time motor is still working, just its force is not strong enough to push the
door, so you must stop the motor working manually
power-off ),to avo
Attentions:
1. The working voltage of the control box is
2. The wire buried underground should use thick, double conductor. The three
shielding layer of travel switch should be well grounded and not a adapter between. The
conducting wire should be set into PVC tube or pipe and do waterproof processing.
3.The default value is 90 seconds. Use battery of DC12V, 27A for remote controller,
working life is one year. Remote controller can not be moisture, crashed. If want to reset
password, please refer to password setting.
4. If can only control a short distance, please check if the mainframe is installed in the
position that is shielded by metal objects or nearby.
5. Non-professional personal is forbidden to install the control box and circuit. We are
out of responsibility for any personal safeties caused.
6. If the control box has any qu
the strength of resistance when meet obstructions during closing or
adjust the starting strength during soft star.
adjust the travel torque of motor: During operating of motor, the travel
can be adjust to avoid clamping when the door run into resistance. (Note: at
this time motor is still working, just its force is not strong enough to push the
door, so you must stop the motor working manually (by remote control or
off ),to avoid long-time running of the motor and causes problems.
1. The working voltage of the control box is
～
220V+ 10%, don’t connect to 380V.
2. The wire buried underground should use thick, double conductor. The three
l switch should be well grounded and not a adapter between. The
conducting wire should be set into PVC tube or pipe and do waterproof processing.
3.The default value is 90 seconds. Use battery of DC12V, 27A for remote controller,
Remote controller can not be moisture, crashed. If want to reset
password, please refer to password setting.
4. If can only control a short distance, please check if the mainframe is installed in the
that is shielded by metal objects or nearby.
professional personal is forbidden to install the control box and circuit. We are
for any personal safeties caused.
6. If the control box has any quality problem, please send to agent for dealing with. If
the strength of resistance when meet obstructions during closing or
the travel torque
can be adjust to avoid clamping when the door run into resistance. (Note: at
this time motor is still working, just its force is not strong enough to push the
(by remote control or
time running of the motor and causes problems.
t connect to 380V.
2. The wire buried underground should use thick, double conductor. The three-core
l switch should be well grounded and not a adapter between. The
conducting wire should be set into PVC tube or pipe and do waterproof processing.
3.The default value is 90 seconds. Use battery of DC12V, 27A for remote controller,
Remote controller can not be moisture, crashed. If want to reset
4. If can only control a short distance, please check if the mainframe is installed in the
professional personal is forbidden to install the control box and circuit. We are
ent for dealing with. If
