Pilot Operating Handbook
Cavalon
SECTION 4
NORMAL PROCEDURES
AutoGyro_POH_Cavalon 915iS
Revision 1.0 – Issue Date 08.MAY.2019
4-4
ʘ
NAV light (if fitted).................................................................................... Check
ʘ
Strobe light (if fitted) ................................................................................ Check
Anti-collision beacon (if fitted) .................................................................. Check
Station 7
(forward fuselage and windshield)
General appearance..................................................................................... OK
Pitot cover (if installed) ....................................................................... Removed
Pitot tube .................................................................................. Clean and open
Rotor lash bag (if sufficient brake pressure)........................................ Removed
Windshield condition and cleanliness...................................... Check, no cracks
ʘ
Nose wheel condition and air pressure .................................................... Check
ʘ
Landing light nose and underbody cleanliness/security............................ Check
Air intake ................................................................................no foreign objects
Station 8
(cabin, RH side)
Static port ................................................................................. Clean and open
Rotor brake pressure..........................................................................min. 6 bar
ʘ
Throttle lever .............................................................. Check function, full travel
ʘ
Brake lever and lock ............................................. Check function and condition
ʘ
Pedals and control cables........................................................................ Check
ʘ
RH control stick bolts and nuts (or Quick-pins if fitted) .......................... Secured
ʘ
Monocoque structure condition................................................................ Check
Loose objects ........................................................................Removed/secured
Door hinge/s ....................................................... Quick pin installed and secure
Door window........................................................................... Check, no cracks
ʘ
NAV light (if fitted).................................................................................... Check
ʘ
Strobe light (if fitted) ................................................................................ Check
Anti-collision beacon (if fitted) .................................................................. Check
Station 9
(main gear spring spar, RH)
Main wheel tyre ....................................................................................... Check
Air pressure and slip mark ..............................................................Visual check
ʘ
Brake, disc attachment (4 bolts) and wheel attachment ........................... Check
Wheel spat and attachment ..................................................................... Check
ʘ
Main gear spring spar attachment............................................................ Check
Main gear spring spar.........................................................................No cracks
Cooling air intake....................................................................... No obstructions
Vibration decoupling element attachment (2x) ......................................... Check
Gimbal head bolts (2x)............................................................. Split pin installed
Rotor flight control attachments ...........................No excessive play and secure
ʘ
Main rotor bearing .................................................................... Check condition
ʘ
Pre-rotator assembly and brake................................................ Check condition
ʘ
Teeter bolt (bolt end) ....................................................................... Free to turn
Teeter bolt (nut end) ................................................................ Split pin installed
ʘ
Teeter stops ............................................................................................ Check
ʘ
Rotor hub and blade clamping area ......................................................... Check
Blade attachment bolts ............................................... All installed and fastened