Copyright of RotorSport UK Ltd
Document number RSUK0060
Page 66 of 101 Page issue 2, dated 12.09.11
Hinge attachment screws
Front seat adjustment. The seat back is connected to the base of the aircraft via two hinges.
Each hinge is bolted to the aircraft with two countersunk bolts. Removing these bolts allows
the seat back to be moved fore and aft along the aircraft and then bolted back in place to
match the required pilot seated position.
WARNING! Take care to tighten securely, and to ensure both hinges are the same number
of holes from the rearmost position.
6.6 ENGINE
The engine provided is either a 4 stroke Rotax 912 or 914. This engine is appropriate for the
market, and is in use on many other similar aircraft – but possesses no certification. Engine
failures occur with more regularity on uncertified engines, so always plan your route and fly
in such a way that an emergency landing is safely possible. To ensure maximum reliability,
complete all maintenance requirements in line with manufacturers recommendations, on
time.
When replenishing cooling agents never use pure water, only the recommended 50/50
mixture of ethylene glycol antifreeze and distilled water (or Evans NPG+ or equivalent only if
marked on the filler).